| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| WEST: ZPoxy alternative for pores? http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=10025 |
Page 1 of 1 |
| Author: | JohnAbercrombie [ Wed Dec 27, 2006 5:57 am ] |
| Post subject: | |
Since I always have WEST System products around the shop, and my epoxy supplier doesn't stock Z-Poxy, I was wondering if anybody was using WEST epoxy for pore-filling on guitars. I'd appreciate comments. Thanks John |
|
| Author: | Pwoolson [ Wed Dec 27, 2006 6:00 am ] |
| Post subject: | |
It can certainly be used. the only drawback is drying time. If you bump up the heat a bit you should be ready to sand after an over-night drying. |
|
| Author: | David R White [ Wed Dec 27, 2006 6:10 am ] |
| Post subject: | |
I use it, I generally sand after 24 hours. |
|
| Author: | JohnAbercrombie [ Wed Dec 27, 2006 8:18 am ] |
| Post subject: | |
Thanks, guys. John |
|
| Author: | Andy Zimmerman [ Wed Dec 27, 2006 9:48 am ] |
| Post subject: | |
Tony Ferguson who finishes guitars for me uses and and gets AWESOME results. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|